SWIMN S1 - Product Specifications; Troubleshooting Common Issues; Propeller Rotation Problems; High Battery Temperature

1110
Product Speci󽗉cations
Size
Weight
*Speed
Thrust
Operation environment
Operation temperature
Rated Motor Power
Rated Voltage
Rated Capacity
Maximum Charge Voltage
Minimum Discharge Voltage
Charging Time
**Cycle Life
Charging Input
Charging Output
Charging Temperature
20.5'' x 15.4'' x 5.7'' (520mm x 390mm x 145mm)
7.7lb (3.5kg)
2.5mph (4km/h)
50N
Fresh water/saltwater; Depth < 9.8 feet (3m)
32 ℉ - 113 ℉ (0℃ - 45° C)
250W
22.2V
4400mAh
25.2V
17.5V
3 Hours
≥ 500 Cycle
100-240V; 0.35A; 50/60Hz
25.2V; 2A
41 ℉ - 104 ℉ (5° C - 40° C)
*The speed may vary by person and water conditions.
**@ Capacity > 70% (100% DOD) @ 25 ° C
Troubleshooting
Battery light indicator Problem Solution
Flashes red once and blue once
alternately and constantly
Propeller rotation problem
1. Stop using SWIMN S1 immediately, shut it down, and
check the propeller.
2. If there are foreign objects around the propeller,
please remove them and try again.
3. If the battery light still 󽗊ashes, please contact your
local dealer or SWIMN customer service.
Flashes red once and blue twice
alternately and constantly
Battery temperature is too high
1. Stop using SWIMN S1 immediately and shut it down.
2. Place SWIMN S1 in a cooler environment (32 ℉-
86℉/0-30° C), and wait for its battery to cool down.
3. If the battery light still 󽗊ashes after two hours, please
contact your local dealer or SWIMN customer service.
Flashes red once and blue three
times alternately and constantly
Battery or charger voltage problem
1. Make sure you charge SWIMN S1 with the supplied
charger.
2. If the battery light still 󽗊ashes, please contact your
local dealer or SWIMN customer service.
Flashes red once and green
several times alternately and
constantly
Internal error
1. Stop using SWIMN S1 immediately and shut it down.
2. Contact your local dealer or SWIMN customer service.