Swing Case SC304D - Swing Case User Guide and Precautions; General Installation and Compatibility Notes; Chemical Storage Safety Warning; Securing the Swing Case with a Padlock

User Guide - Warranty
SC3007WC_Install
Modied Oct 2018
Thank you for purchasing the Swing Case!
• Read instructions completely before installing your Swing Case to your truck.
• The Swing Case is designed for trucks that do not have a bedliner (spray in bedliners pose no problem).
Trucks that do have plastic drop in bedliners or Bed Rugs will require some trimming of the liner to ensure
proper t of the brackets. We provide some guidelines for installing with liners, however due to the wide
variety of liner manufacturers, the modications will vary. Any modications must be made to the liner and
NOT to the Swing Case mounting hardware. Modications to the mounting hardware could result in
improper installation and will void your warranty.
• The Swing Case is left and right specic. They will not interchange.
• The Swing Case will not work with bed extenders.
• The Swing Case will work with most tonneau covers. If you have any questions regarding your installation,
please contact our customer service team at the number below.
To secure the Swing Case tool box to the truck bed, place a small to medium size
padlock in the tab on the truck bracket. Padlock must be purchased separately.
Warning: Chemicals that are NOT labeled safe for use with plastics should NOT be
stored in the Swing Case. Some chemicals such as insect repellents, brake uid
and solvents can potentially damage the plastic. Doing so may void the warranty.