To Next PageTo Next Page
Need help?Do you have a question about the Swing Case SC302P and is the answer not in the manual?
General| Model | SC302P |
|---|---|
| Category | Automobile Accessories |
| Capacity | 75 lbs |
| Color | Black |
| Mounting Location | Truck Bed |
| Product Type | Truck Bed Storage Box |
| Dimensions | 16 x 8.5 x 34 inches |
| Compatibility | Full-Size Trucks |
| Installation | No Drilling Required |
| Type | Truck Bed Storage Box |
Attach the striker bracket to the truck bracket using the two assembly nuts.
Position bracket to the wheel well area and attach to the truck bed with screws.
Lower the box onto the hinge pins and gently push it to the stowed position.
Check latch operation, adjust if necessary, and clear metal shavings from the truck bed.
Insert pivot lock at an angle between lower tab and pivot bushing, then rotate into position.
Slide pivot lock down, rotate towards bracket, align with slotted hole, and turn key 90 degrees.
Read instructions, understand liner modifications, note left/right specificity, and avoid bed extenders.
Do not store chemicals not labeled safe for plastics in the Swing Case to avoid damage.
Covers ABS polymer, lock, hinges, and hardware for one year from retail purchase date.
Excludes neglect, improper installation, abuse, chemicals, and lack of maintenance.
Clean with mild soap; use only plastic-safe cleaners and avoid abrasive materials.
