4
Introduction
Thank you for choosing this shredder from Swingline. We
are sure it will serve you well. Please take a little time to read
these instructions to ensure you get the best out of
your machine.
Safety First
• Please store this instruction manual in a safe place for future
reference.
• Please pay close attention to the safety symbols on the top of
the shredder and operate the machine accordingly.
• If the shredder needs cleaning, unplug the unit from the
power socket and use a damp cloth. Do not use any cleaning
products to clean the unit.
• Do not position the unit near to an object that radiates heat.
• Do not place the unit in a damp environment.
• Take care not to splash any liquid onto the machine.
• Return the product and proof of purchase with receipt to the
store at which it was purchased if…
- The power cable or plug is broken.
- The machine malfunctions because liquid was accidentally
spilt onto the machine.
- The shredder doesn’t operate despite following the
guidelines in the manual.
• Make sure the power cable isn’t a trip hazard.
• Please ensure the power supply is compatible with the
requirements of the machine (120V~60Hz).
• To avoid risk of injury, do not open the machine’s casing to
attempt DIY repair. Any attempted repair by an unqualied
person will invalidate the warranty.
DO NOT attempt to repair shredder yourself.
KEEP OUT OF REACH OF CHILDREN.
•
•
Lights and Icons Explained
LEDs
Auto Cool Down
Color of LED Blue Red
Power On/Off Switch
Auto Mode light
Forward Mode light
Reverse Mode light
Cool Down Indicator light light
Sleep Mode
* 8.5” x 11”, 20lb., (75g) paper at 120V, 60Hz, 2 Amps. Heavier paper,
humidity or other than rated voltage my reduce capacity.
Specifications
Cutting Type
Shred Size
Security Class
Sheet Capacity @ 80 gsm paper
Sheet Capacity @ 75 gsm paper*
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current
Swingline EX12-05
Confetti Cut
4 x 35mm
DIN S3
12 sheets
14 sheets
230mm
H405 x W225 x D420mm
120V~60Hz
2 amps
TM/MC
To Next Page