Swissauto 250 - User Manual

31
! IMPORTANT NOTICE!
This engine is designed strictly for competition purposes only.
The manufacturer SWISSAUTO declare that all spare parts and
engines are not covered by any warranty.
Only SWISSAUTO can recognize the manufactured defect after
control.
The authoritative manual
in case of discrepancy is the
manual on the website
www.swissauto.com
swissaut
o
swissaut
o
swissaut
o
swissaut
o
EVO2
Assembly Instructions
and
Operating Manual

Summary

Important Notice

Technical Data

Scope of Supply

Installation onto the Go-Kart

Basic Settings of the Carburetor

Electrical schematic

Assembling the Clutch

Changing the Clutch

Dismantling the Clutch

Tips and Tricks

How to find out the correct gear ratio

Choose gear ratio for max 1 second at end of longest straight to avoid valve train damage.

How to find out the correct carburetor adjustment

Consider main jet table; ambient air pressure and temperature influence nozzle choice.

Scratches on the exhaust muffler

Conventional brackets cause scratches; apply protecting rubber to avoid this.

Lubricate chain and transmission sprocket bearing before every ride

Push clutch drum back, apply chain spray between sprocket and thrust washer.

The clutch is not suited for standing race starts

Avoid starting at high speeds to prevent heavy heating and wear of the clutch.

Recommended Accessories

Special Tools

Maintenance

Start-up

Swissauto 250 Specifications

General

Brand	Swissauto
Model	250
Category	Engine
Language	English