HD-Phone
2.4 GHz
5 GHz
Start
67 5
21
3
4
8
Installation overview
Telephone adapter Ethernet cable
Power adapter
Internet-Box standard
Connect your telephone.
(This only applies if you are a fixed network subscriber.)
You can return old devices to Swisscom for recycling free of charge.
A return label is included on the delivery slip.
HD-Phones:
Select the connection mode in the settings of your HD-Phone and
press the
button on your Internet-Box. The two devices connect
automatically.
Existing telephones:
Connect your phone and
/
or fax machine only to the Internet-Box
(phone 1 and 2) – and not to the telephone socket anymore.
See back for more details.
Connect the power adapter.
Connect the DSL cable to the white
adapter.
Switch on the Internet-Box.
Does your telephone socket look different? Do you have two ports
on your phone socket, for example?
See back for telephone wiring versions under «Other telephone
sockets».
Wait 5
—
10 minutes.
DSL cableTelephone socket adapter
KKD+JM (RES-CWE-UID) 10233694 IP 09/2018 EN
Does the LED light up white?
You are now connected to the
Swisscom network.
> Continue with step 6.
Is the LED still flashing
alternately red and white?
> Please heed the
instructions on the back
under «LED behaviour».
Remove your old Internet
/
telephony installations (if any).
www.swisscom.ch/internetbox-help
Swisscom (Switzerland) Ltd
Contact Center
CH-3050 Bern
www.swisscom.ch
0800 800 800
Setting up your
Internet-Box
Internet-Box standard setup (IP)
The package includes:
Your WLAN is enabled.
You can activate and deactivate your WLAN by pressing the
button.
You will find further information about your WLAN as well as your
access data (WLAN name and password) on the reverse side.
See reverse for more info.
Your Internet is now set up.
Install the free Home app now. Simply
by using your WLAN password, you can
make your home safer and find out who
is accessing your network.
You can access the
«Swisscom Home» app here:
To Next Page
Need help?
General
