Swiss+go MT-100 User Manual

ESTACIÓN METEOROLÓGICA MT-100
UNIDAD DE VISUALIZACIÓN Y SENSOR EXTERIOR
1. Temperatura y humedad exteriores
2. Indicador de batería baja del sensor
3. Intensidad de la señal del sensor exterior
4. Icono de alea de temperatura exterior
Guía Rápida
Descripcion:

Swiss+go MT-100 Specifications

General

Brand	Swiss+go
Model	MT-100
Category	Weather Station
Language	English

Summary

Display Unit and External Sensor Components

Outdoor Temperature and Humidity Display

Details the outdoor temperature and humidity readings shown on the display unit.

Sensor Low Battery Indicator

Indicates the battery status for the external sensor.

Outdoor Sensor Signal Strength

Shows the signal strength between the outdoor sensor and the display unit.

Outdoor Temperature Alert Icon

Alert icon for outdoor temperature notifications.

Device Buttons

SNZ/LIGHT Button

Snooze function and backlight control.

MODE Button

Cycles through different display modes and settings.

SET Button

Used for setting time, date, and other parameters.

ALARM Button

Controls alarm settings and functions.

RF Button

Radio frequency signal synchronization button.

DOWN Button

Decreases values or navigates down in menus.

UP Button

Increases values or navigates up in menus.

Battery Installation and Settings

Installing or Replacing Batteries

Recommendations for battery usage and warnings against mixing battery types.

Default Settings Configuration

Details the default time, date, week, weather forecast, temperature, and barometer units.