SWIT S-2041 User Manual

Congratulations on your purchase of this product. Please read this user manual carefully.
Features
 New generation chip-array LED technology, outputs bright but soft & non-glaring light;
 60° wide beam angle, equally spread light, no visible lighting edge and single shadow;
 23W power consumption, 1200 lux @ 1 meter, equivalent to a 100W halogen bulb, and 10%-100% dimmerable;
 5000K color temperature and can be switched to 5600K or 3200K by filters;
 6V-17V wide voltage input, support D-tap power, standard DV battery power and special slim battery power;
 High intensity and toughness glass fiber housing, cool-touch, and both screw and cold shoe install.
Product view
Fig 1 Fig 2
Caution
1. Never attempt to open the device. Refer all servicing to
qualified personnel.
2. Never insert anything into the cooling vent to avoid damage
or short circuit.
3. Keep the light away from rain or moisture.
4. Please do not stare at the turned on LED light.
5. Keep the filters clean.
6. When powering through DC-IN socket by D-tap cable,
please make sure the power supply's voltage and power meet
the light input requirements.
7. Working temperature: -10 ~40 ℃ ℃
8. Keep the cooling vent clear to avoid damage.
Clean
Use a soft, dry cloth to clean the LED light. If you clean the
light with soft cloth slightly moistened with neutral detergent,
please dry the surface of the light with a soft, dry cloth. Do
not use a damp cloth or alcohol, gasoline and other solvents
of any kind.
Specifications
Model S-2041
Input DC 6V-17V
Power consumption
Approx. 23W
Beam angle Approx. 60°
Illuminance 1200 lux @ 1 meter
Color temperature 5000K itself,
CRI >85
Working temp. -10 ℃ ~+40 ℃
Storage temp. -20 ℃ ~+55 ℃
Dimension 103×157×84mm
Mass Approx. 400g
Package
LED light × 1
Cold shoe base × 1
D-tap power cable (S-7104) × 1
Portable bag × 1
User manual × 1
Chip-Array LED Camera Light S-2041
USER MANUAL
SWIT Electronics Co., Ltd.
Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: contact@swit.cc
1. 5600K filter
2. Barn door
3. 3200K filter
4. Barn door
5. Cooling vent
6. Switch on/off
7. Knob
8. 1/4” screw bolt
9. Dimmer
10. DV plate slot
11. DC-IN socket
12. Protection cover
Ver:V1.0.0V00

SWIT S-2041 Specifications

General

Weight	1.2 kg
Charging Channels	4
Input Voltage	100-240V AC
Output Voltage	16.8V
Power Supply	AC Adapter
Charging Current	2A × 4

Summary

Product Overview and Features

Product View

Diagram illustrating the components and design of the S-2041 LED camera light.

Key Features

Highlights the advanced chip-array LED technology, beam angle, power, and build quality of the light.

Important Cautions

Provides essential warnings regarding device handling, cooling vents, moisture, and direct light exposure.

Technical Specifications

Lists detailed technical data including model, input, power consumption, beam angle, and dimensions.

Cleaning Instructions

Guidance on how to properly clean the LED light using soft, dry cloths and mild detergents.

Package Contents

Details the items included in the product package, such as the LED light and accessories.

Using the S-2041 LED Light

Powering the Light

Explains methods for powering the light using slim batteries, standard DV batteries, or DC input.

Mounting the Light

Instructions on how to attach the LED light to a camera via screw mount or cold shoe.

Adjusting Light Angle

Guidance on tilting the light unit for desired illumination direction.

Basic Operation

Covers opening barn doors, switching the light on, and adjusting illuminance and color temperature.