17
2. Pull your SwitchBot Curtain 3 Rod, make it roll onto the magnet attachment and
stop within the area as shown in the picture.
3. Hide your SwitchBot Curtain 3 Rod behind your fabric curtain to finish.
Situation 2: Double-sided curtains without a bracket in the middle
1. Fully close your curtains. Use the red long sticker to mark the middle position.
Please note: only using your eyes to measure the position may cause deviation. Please be
sure to use the provided sticker.
Area where the roller should stop at
Left-closing
Single-sided Curtain
Left-closing
Single-sided Curtain
To Next Page
Loading...
