18
2. Open your curtains. Peel off the tape liners of your magnet attachments, and stick
them along both sides of the dotted line symmetrically.
Please note:
a. Two magnet attachments need to be close to each other, wrapping the rod at the
bottom.
b. The magnet pieces inside the attachments need to be parallel with the rod.
3. Pull your two SwitchBot Curtain 3 Rod devices separately, make them roll onto the
magnet attachment and stop within the area as shown in the picture.
4. Remove the red sticker. Hide your SwitchBot Curtain 3 Rod behind your fabric
curtains to finish.
Area where the roller should stop at
To Next Page
Loading...
