nstalling the Side Brush
Powering on and charging
Tip:
When you hear a clicking sound,
it means the Side Brush has been
properly installed.
O Removethe faceplate as shown in the picture, and turn on the
Power Switch. "I" means powering on, and "O" means powering
off.
Wait for the indicator light on your robot to light on, then
manually dock your robot to the Auto-empty Station to charge, as
hown in the picture. You will hear the voice prompt "Charging"
White
Battery 215%
Orange
Battery <
Note:
To maintain battery performance, please keep the robot charged during daily use.
Before using the robot for the first time, it is recommended to charge it for a while.
If it cannot be turned on, it might be due to insufficient battery. Please dock the robo
directly to the Auto-empty Station.
08
To Next Page
Loading...