ater Station Activation
Please activate the Water Station before use:
Press and hold the Bluetooth Reset Button for 2 seconds until th
indicator light flashes white.
.o
Please note:
f activation fails, use a 5 V 2 A Type-C charger to charge the Water Station for 6 hours firs .
nstalling the Water Station
Please follow the User Manual of SwitchBot Floor Cleaning Robo
Sl 0 Water Station to install your Water Station.
upport.switch-bot.com/hc/en-us/sections/18659086869911
Setu Guide
Please note:
I . The Water Station has two connected hoses on its back, one for water inlet, and on
for water draining. The inlet hose can be connected to your home's water inlet syste
to provide clean water for mopping and washing the Roller Mop. The drain hose ca
be connected to your home's drain system, to discharge the waste water.
.Water inlet requirements: water pressure should be between 0.1 MPa to 0.6 MPa,
and water temperature should be below 40 oc.
. Please refrain from using old hose sets when setting up your appliance.
Instructions for Use
Connecting to Our App
O Download the SwitchBot app to experience more personalize
settings and a better user experience.
ou will need:
• A smartphone or tablet using Bluetooth 4.2 or later.
• The latest version of our app, downloadable via the Apple App
Store or Google Play Store.
• A SwitchBot account, you can register via our app or sign in to
your account directly if you already have one.
Download on the
App Store
iOS 14.0+
Google Play
Android OS 5.0+
09
To Next Page
Loading...