Need help?Do you have a question about the SWR California Blonde and is the answer not in the manual?
General| Power | 120 watts |
|---|---|
| Channels | 2 |
| Effects | Aural Enhancer |
| Power Amp | Solid State |
| Speaker Configuration | 1 x 12" |
| Effects Loop | Yes |
| Type | Acoustic Amplifier |
| Speaker | 1x12" speaker |
| Inputs | 1/4" |
| EQ Controls | Bass, Midrange, Treble |
Ensure proper grounding, protect power cords, avoid overloading, and unplug during storms.
Refer servicing to qualified personnel and follow procedures for damage or abnormal operation.
Details the amplifier's power output at different impedances.
Specifies the woofer and supertweeter details, impedance, and crossover point.
Details instrument, stereo, and mic inputs, gain control with overload indicator and phase pull.
Connect power cable, set controls to minimum, and turn on the amplifier.
Plug in instrument, adjust Gain and Master Volume for desired sound and clarity.
Procedure for setting gain to ensure optimal signal-to-noise ratio and avoid clipping.
Controls overall output level and blends reverb into the signal path.
Steps to follow if the SWR bass combo requires service or repair.
To Next Page
