45
Press Off
1.4 To end your ride, simply press the same
button to turn off the Power Pack.
1.1
1.2
To start your ride first make sure
all cables are connected fully and
the magnetic disc has been fitted
correctly.
Press the On/Off button on the
front of the Power Pack, the LEDs
should show, indicating that the
power is on.
1.3 Start pedaling, the pedal sesnor
will flash and the power will begin
to kick in.
Note
If you have connected a display,
these instructions will slightly differ.
Please refer to the display manuals
for more help.
Starting Your Ride
Press On
To Next Page
Loading...
