EasyManua.ls Logo

SXT Scooters Buddy V2 eKFV - Display Settings and Trip Reset

SXT Scooters Buddy V2 eKFV
78 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
Throttle / LCD Display / Functions
Settings - Display functions
To access the Display Settings menu:
Press the buttons simultaneously for 2 seconds.
Press to switch between the different modes.
Press and hold to return to the main menu.
Turn on the display, go to the setting mode, then press
to increase the display backlight.
LCD backlight (1st mode)
Light comes on at the same time. There are 3 different brightness levels.
Press to switch between the levels. (low/medium/high).
Press and hold to save the setting.
Press briey to switch to 2nd mode.
Reset trip kilometers!
Press and hold to reset the trip kilometer.
(not possible in setting mode!)
Further display functions:
TRIP: Your route since the last reset.
ODO: The total distance your vehicle has travelled since the battery was manufactured,
replaced or repaired.
Battery voltage: Your current state of charge of the battery.
Error: There is a problem with your vehicle - please contact your dealer to locate the
error.
Possibility of setting the mode
- Display Brightness

Related product manuals