3.2 Drive
1. Lift up the side stand. While the scooter is standing on this safety stand, it can not be started. (only for EEC models)
2. Turn the key switch on the handlebar to the right. (For models without street approval, you can also turn on the light).
3. Place make one foot on the treadplate while supporting yourself on the ground with the other to avoid falling over.
Slowly and carefully turn the throttle grip on the right side of the handlebar and the scooter begins to move.
4. To brake, release the throttle grip and apply the brake levers on the right and left sides of the handlebar.
5. Pay attention to the charge status indicator on the throttle grip.
6. also mounted on the handlebar speedometer all important information can be read. (Applies only to EEC models.
If you need a manual for the speedometer please contact our customer service.)
speed
Charging Indicator
Display - Trip km and total distance
On / Off
Info Button - to switch from Trip km to total distance
To Next Page
Loading...
