How tight should the chain be ?
• If the chain is skipping or jumping on the sprockets, this is too loose and
may be harmful.
• If the chain is making a humming sound when the wheel is turning, this is
too tight and may cause the chain to snap.
• The correct tension is achieved by adjusting the chain from its loose positi-
on to when it becomes lightly tense.
MAINTENANCE SCHEDULE
Proper care of your scooter will insure optimal performance and longer life span.
The following are a few maintenance suggestions that will keep your scooter running
in top condition.
To tighten the chains:
Slightly loosen the two axle bolts on both sides of the
rear wheel. (Fig.14). Then slowly adjust the two adjus-
ting screws on each side of the rear tire (Fig.15) until
chain reaches the proper tension.
Rotate the rear wheel to make sure the chain is alig-
ned.
Finally, lock and tighten the rear axle bolts prior to
riding.
MAINTENANCE
i n s t r u c t i o n s sxt-scooters
12
To Next Page
Loading...
