PACKAGE CONTENT / GETTING STARTED
Assembly Thank you for reading the instructions
carefully.
1. 1. Carefully remove the SXT Scooter from the box.
2. 1. To unfold the Scooter, begin by pressing down on the
FOLDING HANDLE with one hand while gently pulling up
on the handlebars with the other.
3. Fully extend the handlebars to their upright position until
you feel the mechanism lock into place.
4. Attach the handlebars by inserting the silver handlebar
clamp onto the handlebar post stopping just below the top.
Be sure to orient the bars in the correct riding position with
the throttle on the rider’s right side. Secure the handlebars
to the post by tightening the bolts on the clamp with the
enclosed Allen wrench as shown. .
5. Secure the hand brakes in place by using the provided
Allen Wrench to rst loosen the tension bolts. Adjust the
levers to a comfortable position and tighten the bolts.
* BE CAREFUL NOT TO PULL ON THE CABLES!
Your SXT scooter comes with the
following accessories:
1. 1 Scooter SXT
2. 1 36 V battery charger
3. Toolkit and fuses exchange
4. Seatpost, saddle & rearview
mirror
5. Clamp
i n s t u c t i o n s sxt-scooters
5
To Next Page
Loading...
