Syba SY-ENC35028 User Manual

SY-ENC35028
3.5” 2-BAY RAID Storage Enclosure
User Manual
1 Introduction
1.1 Features
-Supports JBOD, RAID0,RAID1,Normal mode
-Enhanced data protection and high -performance storage
-Automatic disk rebuild (Under SAFE Mode)
-Supports USB3.0 high speed to reach 5.0Gbps
-Supports Plug-play and Hot-plug
-Supports mode select via jumper setting
1.2 Specifications
Inner Interface: SATA
Outer Interface:USB3.0
Date Transfer rate: Support USB 3.0 super-speed (5Gbps),
Complies with USB 2.0 high speed (480Mbps),USB 1.1 Full speed (12Mbps)
Suitability: 2 x 3.5” SATA I/II/III HDD

Syba SY-ENC35028 Specifications

General

Type	External Enclosure
Interface	USB 3.0
Material	Aluminum
Compatibility	SATA I/II/III
Color	Black
Operating System Compatibility	Windows, Mac, Linux
Drive Size	2.5 inch

Summary

1.3 System Requirements

2 RAID Function

What is RAID?

Defines RAID (Redundant Array of Independent Disks) as technology for fault tolerance and performance.

Why RAID?

Highlights benefits like data protection, capacity, and I/O efficiency.

Changing the RAID Mode

Provides instructions on how to set the RAID mode before installing drives.

RAID0 (Striping)

Details RAID0 as dividing data for increased speed and capacity, but data loss if any drive fails.

RAID1 (Mirroring)

3 System Setup

3.1 Hard Drive Assembly

Provides step-by-step instructions for physically installing HDDs into the enclosure.

3.2 Connect to computer

Explains how to connect the enclosure to a computer using USB and power cables.

3.4 Replacing Hard Drives