Need help?Do you have a question about the Syba SY-ENC50122 and is the answer not in the manual?
Details single HDD capacity up to 16TB and total RAID 0 capacity exceeding 80TB.
Covers 12V8A power supply needs, voltage alerts (yellow/red lights), and smart fan with sleep mode.
Specifies transfer rates via USB3.0 (5Gbps) and eSATA (3Gbps), and supported OS (Win, MAC, Linux).
Explains automatic sleep modes during data transfer and computer sleep/shutdown, with wake-up triggers.
Lists all package contents: enclosure, Type-C cable, eSATA cable, 12V8A adapter, power cable, CD, screwdriver, and screws.
Step-by-step guide for installing 3.5-inch HDDs, covering panel removal, tray insertion, and screw alignment.
Procedure for 2.5-inch HDDs: removing clasp, placing drive, and securing with screws in the tray.
Describes the front panel's HDD POWER LED (blue) and HDD ACTIVITY LED (yellow) functions.
Explains lower panel LEDs for normal/RAID modes, including POWER, 1-5 LEDs, and E/R error/rebuild indicators.
Details the purpose of the Power Switch, 12V input, RESET/RAID switches, USB 3.0, eSATA ports, and smart fan.
Initial setup involves setting switches to OFF and performing a 15-second RESET button press when powered on.
Instructions for selecting RAID modes via switches, with a crucial warning to back up data before changing.
Table mapping switch configurations (S/W1-3) to RAID modes like RAID0, RAID1/10, RAID3, RAID5, CLONE, LARGE, NORMAL.
Visual guides illustrating HDD movement and resulting disk volumes for various RAID configurations.
Guide to installing RAID Manager from CD, locating files in Windows Explorer, and launching the application post-install.
How to launch the RAID Manager, view initial disk status, and access Basic/Advanced modes.
Details warning messages shown in the software for enclosure connection status and disk unplugging events.
Configuring RAID modes using the 'Basic Mode' interface, with availability dependent on installed HDDs.
Process to apply selected RAID mode via 'Apply' button, highlighting the critical data loss warning.
Displays progress of RAID creation and confirms successful setup with a 'created' message.
Procedure to delete all RAID groups and restore independent disks, requiring confirmation due to data loss.
Monitoring RAID status for degraded drives and the progress of automatic data reconstruction after replacement.
Shows normal RAID status and emphasizes selecting either Hardware or Software RAID, not both.
Troubleshooting steps for power problems: checking power supply, connections, and indicator lights.
Resolving issues with manual RAID setup, including switch settings, RESET button usage, and software installation.
Guidance on automatic recovery, handling rebuild failures, and disk replacement precautions for RAID rebuilding.
General| Type | External Enclosure |
|---|---|
| Material | Aluminum |
| Color | Black |
| Cooling | Passive |
| Interface | USB 3.0 |
| Supported Drive Type | SATA HDD/SSD |
| Chipset | JMS578 |
| Supported Drive Size | 2.5 in |
| Form Factor | 2.5" |
To Next Page
