EasyManua.ls Logo

SycoTec e@syDrive 4624 - Scope of Supply and Accessories; Scope of Supply; Accessories

SycoTec e@syDrive 4624
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
7
PFH
A
Propability of a Dangerous Failure per Hour
PLC
Programmable logic controller
PMSM
Permanent-magnet synchronous motor without rotor position sensor
PTC
Positive temperature coefficient
RMS
Root Mean Square
SD card
Secure digital memory card
SDO
Service data object
SN
Serial number
STO
Safe Torque Off
T
Motor temperature
U
Motor phase U
U
eff
RMS voltage
UL
Underwriters Laboratories (Organisation that tests and certifies products for their safety)
USB
Universal Serial Bus
V
Volt
V
Motor phase V
V/Hz
Voltage-frequency ratio
VA
Volt-ampere
W
Watt
W
Motor phase W
2.0 Scope of Supply and Accessories
2.1 Scope of Supply
Frequency inverter e@syDrive 4624 Material no. 2.002.1053
Frequency inverter e@syDrive 4625 Material no. 2.002.1054
Frequency inverter e@syDrive 4626 Material no. 2.002.1055
Mini USB cable (1.8 m) Material no. 2.002.2675
Operating Manual SycoDrive Operating Software Material no. 2.002.2669
Operating Manual e@syDrive 4626, 4625, 4626 Material no. 2.002.1912
Micro SD card (2GB) Material no. 2.002.5831
Check that all parts are present.
2.2 Accessories
The following power supply modules from SycoTec are specially designed for use with frequency
inverters e@syDrive 4624, 4625, 4626 and are therefore recommended:
Power supply e@syDrive 4428 Material no. 1.001.2770
Power supply e@syDrive 4429 Material no. 1.002.2515
Alternative options are:
Transformer 4425 360 VA Material no. 2.000.6843
Transformer 550 VA Material no. 2.001.9835
Transformer 4426 1.100 VA Material no. 2.001.0922
Transformer 1.300 VA Material no. 2.002.4336
DANGER
When using a transformer or different mains adapter, double isolation must be maintained between the
secondary voltage and mains voltage. This means that the frequency inverter supply voltage must be
galvanically separated from the mains.
Ensure that the supply voltage is equipped with an overcurrent protection device.

Table of Contents

Other manuals for SycoTec e@syDrive 4624

Related product manuals