EN
Table of Contents
1.0 User Information 5
1.1 Symbols Used 5
1.2 Important Definitions 5
1.3 Abbreviations 6
2.0 Scope of Supply and Accessories 7
2.1 Scope of Supply 7
2.2 Accessories 7
3.0 Safety Instructions and Warnings 8
3.1 Appropriate Use 9
3.2 Installation, Commissioning and Operation 9
3.3 Operation 10
3.4 Transport, Storage, Maintenance and Disposal 10
3.5 EMC 11
4.0 Technical Data 12
4.1 Type Plate 12
4.2 Performance Data 13
Frequency inverter e@syDrive 4624 13
Frequency inverter e@syDrive 4625 13
Frequency inverter e@syDrive 4626 13
Nominal and Overload Conditions 13
4.3 Inverter Dimensions 14
Frequency inverter e@syDrive 4624 14
Frequency inverter e@syDrive 4625 and 4626 15
4.4 General 15
Configuration 15
FW button 16
Operation 16
Display 16
Standards 16
Overload situation 16
Protection category 17
Appliance class 17
Weight 17
Ambient conditions 17
Storage and transport conditions 17
4.5 Description of Functions 17
3-phase asynchronous motor (ASM 3-phase) 17
Permanent-magnet synchronous motor without sensors (PMSM) 17
Selection of target value 18
Start/Stop 18
Block diagram 20
5.0 Mounting and Installation 21
5.1 Mounting Frequency Inverter e@syDrive 4624 21
5.2 Mounting Frequency Inverter e@syDrive 4625 and 4626 22
6.0 Connector Pin Assignment 23
6.1 Electrical Installation 23
Wiring guidelines for compliance with the EMC standards 23
Access to the electrical connections 23
Installation electrical connections 24
6.2 Connectors 24
Data of the PCB terminal blocks 25
Data of the PCB connectors 25
6.3 Terminal 1…3 28
Mains connection – Terminal 1…3 28
6.4 Terminal 10…13 28
Motor connection – Terminal 10…13 28
To Next Page
