Why is there no picture or sound on my Sylvania TV VCR Combo?
If you're getting no picture or sound on your Sylvania TV VCR Combo, ensure the AC cord is connected to an outlet, check the antenna connection, and allow the unit to program its tuner memory.
How to troubleshoot no picture on Sylvania TV VCR Combo?
If your Sylvania TV VCR Combo shows no picture or a poor picture, try the following: * Adjust or replace the antenna. * Adjust the picture controls. * Check the antenna cable for any broken pins.
What to do if my Sylvania 6313CE VCR Combo has no sound?
If you're getting no sound or poor sound on your Sylvania TV VCR Combo, try adjusting the volume control on the remote or the main unit. Also, check if the sound is muted by pressing the [MUTE] button to restore the sound.
How to fix no power on Sylvania 6313CE TV VCR Combo?
If your Sylvania TV VCR Combo has no power, ensure the AC cord is properly connected to an AC outlet and that the power is turned on.
How to fix poor picture quality on Sylvania 6313CE VCR Combo?
To improve a poor picture or get a picture on your Sylvania TV VCR Combo, try adjusting the direction or replacing the antenna. You can also adjust the picture controls.
Why is there no sound on my Sylvania 6313CE TV VCR Combo?
If there is no sound or poor sound on your Sylvania TV VCR Combo, adjust the volume control on the remote or main unit. Also, check if the MUTE button is activated and, if so, press it to restore the sound.
What to do if my Sylvania TV VCR Combo has no picture and sound?
If your Sylvania TV VCR Combo has no picture and sound, make sure the AC cord is connected to the outlet, check the antenna connection, and let the TV/VCR program its tuner memory.
Instructions to avoid hazards of electrical shock and fire.
Identifies and describes the controls on the front panel of the TV/VCR unit.
Identifies and describes the buttons on the remote control.
Important safety guidelines for handling and installing batteries.
Instructions for connecting antennas and cable systems to the unit.
Steps for plugging in, turning on, and selecting channels for viewing.
Procedure for manually setting the unit's clock.
Procedure to set TV rating categories for blocking programs.
Set the unit to record programs automatically while away.
Conditions that void the warranty or are not covered.
To Next Page
General
