EasyManua.ls Logo

Sylvania SRCD2732BT - Sound and Timer Settings

Sylvania SRCD2732BT
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
EQ Operation
You can enjoy different EQ sound effect modes.
Press the EQ button will change to different sound effects:
FLAT / POPS / CLASSIC / JAZZ / ROCK
Sleep Function
1. When the unit is switched on, press the SLEEP button repeatedly to select a sleep
duration from either 120, 90, 60, 45, 30, 15 minutes or sleep off. The sleep icon will
show on the display.
2. When the sleep timer is zero, the unit will turn off automatically.
3. To cancel the sleep function, press the STANDBY button to turn off the unit. Or press
the SLEEP button repeatedly to select "sleep off".
Clock Setup
1. Turn off the unit in Standby mode.
2. Press and hold the TIME SET button to access the setup menu.
3. Press the TUNE- or TUNE+ button to adjust the hour. Press the TIME SET button to
confirm and it will go to the next menu.
4. Press the TUNE- or TUNE+ button to adjust the minute. Press the TIME SET button
to save and finish the set up.
Note:
The time set may automatically be overridden by the FM station real time information.
When the unit is turned on in any mode of operation, pressing the TIME SET button
will display the time on the display for a few seconds.
Maintenance
Handling CD
Treat the disc carefully and handle it only by its edges. Avoid touching the shiny, unprinted
side of the disc with your fingers. Do not expose discs to direct sunlight, high humidity,
high temperatures, dust, etc. Do not stick or write anything on either side of the disc.
Sharp writing instruments or ink may damage the surface.

Related product manuals