FUN
CTION： Set time in 12 hour mode
There are three buttons on the speedometer, explanation as below :
1. SET button “S”:
a. Under TRIP mode, press “S” button continuously to reset the TRIP kilometer readings.
b. Under ODO mode and the vehicle is standing still, press SET for above 2 seconds to enter CLOCK
mode. Press “S” button shortly to enter time setting mode.
CLOCK + HOUR CLOCK + MIM (10 MIN.) CLOCK + MIN ( 1 MIN.)
(flashing) (flashing) (flashing)
c. Under CLOCK mode, press “M” button shortly to increase the readings, once per one time.
d. Under time setting mode, press “S” button continuously to exit this setting mode.
2. MODE button “M”:
a. Press “M” button to change between “TOTAL””TRIP””CLOCK” modes.
TOTAL TRIP CLOCK
b. When the engine oil lamp lights on, press “M” button continuously to put it out.
c. The readings will remain there after main switch is turn off.
3. Brightness button”
”
BRIGHTEST BRIGHTER BRIGHT DIM
a. Press ”
” button to adjust the brightness.
b. The setting will remain there after main switch is turn off.
Under TOTAL mode, press “S” button continuously to change between “kilometer” & ”mileage”
readings.
To Previous Page
Loading...
