Symantec Critical System - Uninstalling Tru64 Agents Manually

90 Installing UNIX agents
Uninstalling agents manually
5 Type and run the following commands to remove the agent user and group:
userdel sisips
rmgroup sisips
6 Run the following commands to remove entries from inittab:
rmitab rcsisipsagent
rmitab rcsisidsagent
Uninstalling Tru64 agents manually
You can manually uninstall Tru64 agents.
To uninstall Tru64 agents manually
1 Open a Terminal window on the computer that runs the agent to uninstall,
and become superuser.
2 Run the following command to determine the agent process IDs:
cat /var/run/sisipsdaemon.pid
cat /var/run/sisidsdaemon.pid
3 (Optional) If the process IDs do not appear, do the following to display the
process IDs and stop the agent process:
Run the following commands:
ps -ef | grep sisipsdaemon
ps -ef | grep sisidsdaemon
If the agent processes are not running, continue with the next numbered
step.
If either agent process is running, run the following command to stop the
agent process:
kill -KILL <agent_PID>
4 Type and run the following commands to remove the installation files:
rm -rf /opt/Symantec/scspagent (default directory)
rmdir /cluster/members/\{memb\}/Symantec (default directory)
rm -rf /var/log/scsplog (default directory)
rm -f /var/run/sisipsdaemon.pid
rm -f /var/run/sisidsdaemon.pid
5 If the machine is a member of a TruCluster, and the agent is installed on
multiple cluster members (with a shared physical disk), perform the
following actions:
Remove the cluster member directories and files:
rm -rf /cluster/members/\{memb\}/etc/sisips
rm -f /cluster/members/\{memb\}/sbin/init.d/sisi?sagent
rm -f /cluster/members/\{memb\}/usr/.smdb./SYMCSP513.*