Two logging methods are available: Norton Ghost logging, and the Windows
application log.
From the Options page, you can configure both methods.
To log Norton Ghost messages
1
In Norton Ghost, on the menu bar, click Tasks > Options.
2
Under Notifications, click Log File.
3
Click the Select the priority and type of messages list and select the priority
level at which a message should be logged.
Send all messages, regardless of priority
levels.
All messages
Send only medium and high priority
messages.
Medium and high priority messages
Send only high priority messages.High priority messages only
Do not send any messages, regardless of
priority levels.
No messages
4
Select one or more of the following options:
■ Errors
■ Warnings
■ Information
5
In the Log file location field, enter a path to where the log file should be
created and stored.
If you don't know the path, click Browse and select a location.
6
In the Maximum file size field, specify a maximum size (in kilobytes) that the
log file is allowed to grow.
The file is kept within the limit you set by replacing the oldest logged items
in the file with new items as they occur.
7
Click OK.
To configure which product events are written to a Windows event log
1
In Norton Ghost, on the menu bar, click Tasks > Options.
2
Under Notifications, click Event Log.
45Getting Started
Configuring Norton Ghost default options
To Next Page
Loading...
