EasyManua.ls Logo

Symbo WEEBOT W130 - User Manual

Symbo WEEBOT W130
44 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Návod k obsluze
Instrukcja obsługi
Návod na použitie
User manual
CZ
SK
PL
EN
WEEBOT W130
www.symbo.eu

Table of Contents

Questions and Answers

  • R
    Robert JacksonAug 11, 2025
    What to do if the status indicator light on my Symbo WEEBOT W130 shines solid red?
    • C
      Courtney SullivanAug 11, 2025
      If the status indicator light on your Symbo Vacuum Cleaner shines solid red, it could be due to several reasons. First, check if there was an interruption of electricity during cleaning; if so, connect the appliance to the power adapter and plug it into the wall outlet. Another possible cause is that the appliance has moved over a problem area and is losing suction, in this case, use the remote control to direct the appliance to a safe position and remove it from the window if needed. Also, inspect the edge detection sensors for any obstructions or dirt. If cleaning the sensors doesn't resolve the issue, contact customer service.
  • K
    Kevin McbrideAug 19, 2025
    Why does my Symbo WEEBOT W130 move in an irregular pattern?
    • R
      Robin Wade DVMAug 19, 2025
      If your Symbo Vacuum Cleaner moves in an irregular pattern, it might be due to a dirty cleaning area. Clean the driving treads to resolve this issue. Alternatively, try replacing the cleaning pad and restarting the cleaning cycle.
  • J
    James HallAug 26, 2025
    How to fix blue flashing status light on Symbo WEEBOT W130 Vacuum Cleaner when on glass?
    • K
      Krystal RichardAug 26, 2025
      If the status indicator light on your Symbo Vacuum Cleaner flashes blue when attached to glass, it could be due to a few reasons. First, ensure that the cleaning pads are correctly installed on the Velcro. If the problem persists, check the edge detection sensors for obstructions like cleaning pad material or dirt. Also, if the window is excessively dirty, manually clean a small area first to provide a clean surface for the appliance to adhere to.
  • C
    carrillokimberlySep 3, 2025
    What to do if the remote control of my Symbo WEEBOT W130 Vacuum Cleaner does not work?
    • W
      William ClarkSep 3, 2025
      If the remote control for your Symbo Vacuum Cleaner isn't working, and the appliance is in cleaning mode, only the START/PAUSE button will function. Press the START/PAUSE button to stop the cleaning cycle first, and then try using the other buttons to control the appliance.

Symbo WEEBOT W130 Specifications

General IconGeneral
ModelWEEBOT W130
Battery TypeLithium-ion
Battery Capacity2600 mAh
Battery LifeUp to 120 minutes
Charging Time4-5 hours
Suction Power2000 Pa
TypeRobot
Dustbin Capacity600 ml
Water Tank Capacity350 ml
ConnectivityWi-Fi
Filter TypeHEPA
Runtime120 min

Related product manuals