What to do if my Symbo xBot 5 Vacuum Cleaner shows Error Code FAIL?
If your Symbo Vacuum Cleaner displays Error Code FAIL, it indicates a Wi-Fi connection problem. The suggested solution is to try connecting to Wi-Fi again.
Why does my Symbo xBot 5 show Error Code LO?
If your Symbo Vacuum Cleaner displays Error Code LO, it means the power is low. Please charge the robot.
What does Error Code E46 mean on my Symbo Vacuum Cleaner?
If your Symbo Vacuum Cleaner displays Error Code E46, it indicates that the main brush is overloaded. Remove any obstructions from the main brush. If the problem persists, contact customer service.
What does Error Code E41 mean on my Symbo xBot 5?
If your Symbo Vacuum Cleaner displays Error Code E41, this indicates a left wheel overload error. Remove any obstacles from the wheel. If the problem persists, contact customer service.
Why does my Symbo xBot 5 Vacuum Cleaner show Error Code E3?
If your Symbo Vacuum Cleaner shows Error Code E3, it means the charging voltage is low or auto recharging has failed. Please charge the robot.
What does Error Code E43 mean on my Symbo xBot 5 Vacuum Cleaner?
If your Symbo Vacuum Cleaner displays Error Code E43, it indicates a left side brush overload error. Remove any obstructions from the side brush. If the issue continues, please contact customer service.
What does Error Code E31 mean on my Symbo xBot 5 Vacuum Cleaner?
If your Symbo Vacuum Cleaner displays Error Code E31, it indicates a left side bumper error. Remove any obstacles from the bumper. If the problem persists, please contact customer service.
What does Error Code E11 mean on my Symbo xBot 5 Vacuum Cleaner?
If your Symbo Vacuum Cleaner displays Error Code E11, it indicates a left side anti-fall error. Remove any obstacles from the anti-fall sensors or wheels, or ensure the robot is properly placed on the floor.
What does Error Code E45 mean on my Symbo Vacuum Cleaner?
If your Symbo Vacuum Cleaner displays Error Code E45, it indicates a fan motor overload error. Please, contact customer service.
How to fix Error Code E2 on my Symbo xBot 5?
If your Symbo Vacuum Cleaner displays Error Code E2, it means the robot is turned off while trying to charge. Turn on the power switch on the robot.
General| Brand | Symbo |
|---|---|
| Model | xBot 5 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
