To Next PageTo Next Page
Need help?Do you have a question about the Symetrix SX204 and is the answer not in the manual?
Explains how impedance and sensitivity affect loudness and how to adjust controls.
Defines the minimum operating impedance and how to connect multiple headphones.
Details the 5mm coaxial jack for power input and required adapter.
Describes the 1/4" jack for balanced/unbalanced line level input signals.
Describes the 1/4" jack for balanced/unbalanced line level input signals.
Sets input signal strength, with boost capability.
Yellow LED indicates when the unit is powered on.
Combines stereo or mono inputs for mono output.
1/4" stereo jacks for connecting headphones, minimum 8 ohm impedance.
Individual volume controls for each headphone output.
Details input type, impedance, maximum level, and connector.
Covers frequency response, THD, signal to noise ratio, and gain.
Details output type, impedance, maximum level, and connectors.
Specifies voltage and current needed for operation.
Lists optional accessories like rack mount and security cover.
Explains the need for an RA number and provides contact details for service.
Outlines the steps for getting the unit repaired under warranty.
Explains the process and billing for repairs after the warranty period.
Explains how impedance and sensitivity affect loudness and how to adjust controls.
Defines the minimum operating impedance and how to connect multiple headphones.
Details the 5mm coaxial jack for power input and required adapter.
Describes the 1/4" jack for balanced/unbalanced line level input signals.
Describes the 1/4" jack for balanced/unbalanced line level input signals.
Sets input signal strength, with boost capability.
Yellow LED indicates when the unit is powered on.
Combines stereo or mono inputs for mono output.
1/4" stereo jacks for connecting headphones, minimum 8 ohm impedance.
Individual volume controls for each headphone output.
Details input type, impedance, maximum level, and connector.
Covers frequency response, THD, signal to noise ratio, and gain.
Details output type, impedance, maximum level, and connectors.
Specifies voltage and current needed for operation.
Lists optional accessories like rack mount and security cover.
Explains the need for an RA number and provides contact details for service.
Outlines the steps for getting the unit repaired under warranty.
Explains the process and billing for repairs after the warranty period.
General
