Press Result
ENTER Displays “FUNCTION”
100 Enters 100 as the function number
ENTER Displays Function 100’s first screen: “COMPANY 00-A0-69…”
ENTER Displays “IP ADDRESS…”
1-9… Enter the unit’s IP Address (e.g., 192.168.000.011
ENTER Displays “SUBNET MASK…”
1-9… Enter the Subnet Mask (e.g., 255.255.255.000)
ENTER Displays “DEFAULT GATEWAY…”
1-9… Enter the Default Gateway’s IP address (e.g., 192.168.000.001)
ENTER Displays “10 100 BASE-T – 10”
ENTER Displays “REMOTE LOCKOUT – UNLOCK” (Leave unchanged)
ENTER (5 times) Displays “SAVE CHANGES – YES”
ENTER Saves the new network parameters, and reboots the XL-GPS
Configuring the Time Display
Configure the XL-GPS to display time correctly. Use the menu-driven keypad/display
interface, to enter the functions and select the desired settings, as follows:
• F1 – Time Zone Offset: Set the number of hours difference between your time
zone and UTC. For example:
- Pacific Standard Time is UTC -08:00
- Mountain Standard Time is UTC-07:00
- Central Standard Time is UTC -06:00
- Eastern Standard Time is UTC-05:00
• F2 – 12/24-Hour Format: Select a 12 or 24-hour display format. By default, the XL-
GPS is set to the 24-hour display format (for example, 6 P.M. is displayed as 18:00).
• F66 – Daylight Saving Time (DST): If needed, set when Local time enters and
leaves DST.
- The factory settings for F66 apply to most users in the continental US: DST
begins at 2 A.M. on the second Sunday of March, and ends at 2 A.M. on the first
Sunday of November.
- DST is NOT observed in Hawaii, American Samoa, Guam, Puerto Rico, the Vir-
gin Islands, the Eastern Time Zone portion of the State of Indiana, and most of
Arizona (Navajo Indian Reservation observes DST).
P/N 098-00212-000 File Name 098-00212-000_RevA.pdf 05/09/2010 Page 3
To Next Page
Loading...
Need help?
General
