AURORA WEBLINK (AWL) INSTALLATION GUIDE
6
IG2001EW
Mounting AWL on a Heat Pump Using Dual Lock (Included)
There is a piece of Dual Lock™ (actual product may vary from photo) provided in each box to mount the AWL on the
unit. The Dual Lock cannot be placed where it blocks any of the venting slots. Remove the fi lm from one side and place
it on the back cover of the AWL as shown below. Remove the fi lm from the other side. Select a location on the top of
the heat pump, press and hold for a few seconds.
Venting Slots
Dual Lock
Mounting AWL on a Wall: Using Screws (Not included)
To mount the AWL using screws, use the preformed slots located on the back of the AWL.
3 7/8”
(Note: Slots are approximately 3 7/8 inches apart.)
Aurora WebLink (AWL) Installation and Confi guration
To Next Page
Loading...
Need help?
General