Synco G2A2 - Display Screen Information; Device Operations; TX Transmitter Operations

5
Display Screen
RX Receiver
Operations
TX
1. Power/Mute
Long Press 2s: turn on/off the system
Short Press: mute/unmute the microphone
2. Charging
5V/2A; with USB-C Charging Cable
Please fully charge the product before use.
Low Cut On
Power Indicator
Recording
Muting
Channel
Audio Dynamic Display
Recording Mode:
Mono/Stereo
Channel A
Channel A Gain
Channel A Audio
Dynamic Display
Power Indicator
Channel B
Channel B Gain
Channel B Audio
Dynamic Display
TX Transmitter
Disconnected
Connecting
Connected