Need help?Do you have a question about the Synco G2 and is the answer not in the manual?
Details the external mic input, USB-C port, power, reset, and low cut functions of the transmitter.
Details the USB-C port, power, reset, gain controls, and audio outputs of the receiver.
Explains indicators for power, muting, low cut, and audio dynamic display on the TX unit.
Details display elements for recording mode, power, and audio gain levels on the RX unit.
Covers power, mute, charging, and external mic input for the TX unit.
Covers power, mode switching, charging, and gain control for the RX unit.
Details how to enable or disable the 150Hz low cut filter on the transmitter.
Explains the steps for pairing the TX transmitter with RX receiver channels.
Describes connecting cameras and phones using TRS and TRRS cables.
Details headphone monitoring via the 3.5mm jack and its impedance.
Guide for adjusting audio recording levels on SONY A7S II cameras.
Guide for adjusting audio recording levels on Canon EOS 5D Mark IV cameras.
Guide for adjusting audio mic levels on Panasonic LUMIX GH5 cameras.
Technical details including wireless transmission, frequency, distance, and power.
Technical details including wireless, RF sensitivity, distance, and output.
Details form factor, sound field, polar pattern, frequency range, and sensitivity.
Outlines terms and conditions for the 2-year warranty and exclusions.
States conformity with EU directives for microphones and model G2(A2).
Provides guidelines for proper disposal of the product according to WEEE directive.
To Next Page
General
