EasyManua.ls Logo

Synco G2 (A1) - User Manual

Synco G2 (A1)
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G2(A1)
User Manual
Speci󽗉cations
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Audio Input Level
RF Output Power
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1/8" / 3.5mm TRS Mic Input
1V (0dBV)
<10mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
TX Transmitter
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation speci󽗉cation
Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
Modi󽗉cations to a product by its user or a third party without prior written
consent of SYNCO, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certi󽗉cate, or the
code on the product or warranty certi󽗉cate is altered or torn o󽗈
All consumable accessory attached to a product, like cable, wind mu󽗈,
battery
Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
Please retain your sales receipt and warranty certi󽗉cate as proof of purchase.
If any of these documents is missing, only sales return or chargeable service
will be provided.
If the SYNCO product is out of the warranty coverage, the service and the
parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of quality
defect(s) found in the product under normal use within 30 days upon receipt of
the product.
2. Original SYNCO products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or defective
part will be repaired or replaced without charge (service and materials fee).
Warranty
Wireless Transmission
RF Frequency Band
Approximate RF Sensitivity
Working Distance
Mounting
Number of Audio Channels
Audio Output
Gain
Audio Output Level
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display
Dimensions
Material
Weight
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
-81dBm
492ft/150m(LOS area), 164ft/50m(NLOS area)
Pocket Clip
1
1/8" / 3.5mm TRS Mic Output
1/8" / 3.5mm TRS Headphone Output
0-5 Level
Line Out: 1V; Monitoring: 25-30mW
3.3V-4.7V
Built-in Lithium Battery, 400mAh
1.5H
8H
TFT Screen
52×42×17mm
Plastic
39g
Built-in/External Mic
Mono
Omnidirectional
50Hz-20KHz
-40dB (±3 dB, re 1V/Pa at 1KHz)
135dB SPL (at 1KHz)
RX Receiver
Microphone
Adjust the recording level of inbuilt mics for Canon Camera (Take EOS
5D Mark Ⅳ for example)
SHOOT4:Movie
AF
123
4

5
MovieServoAF
AFmethod
Griddisplay
Movierecquality
Soundrecording
MovieServoAFspeed
MovieServoAFtracksens
Manual
-
0
Enable
+Tracking
FHD
IP B50.00 P MOV
1
Adjust the recording level of inbuilt mics for Panasonic Camera (Take
LUMIX GH5 for example)
3/4
Stabilizer
FlkrDecrease
OFF
OFF
0dB
Ex.TeleConv.
Digital
Picture
Time
Miclevel
MiclevelAdj.
DISP
.
X
Adjustthesound
inputlevel
1
MicLevelAdj.
-3dB
Set
L
-12 0
R
-12 -6 +6±0
2
Soundrecording
Soundrec.Manual
Rec.level
-dB40120
MENU
L
R
2
Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera (Take A7S Ⅱ
for example)
123456789
SteadyShot
SteadyShotSettings
ColorSpace
AutoSlowShut
AudioRecording
AudioRecLevel
On
sRGB
On
On

MENU
1
AudioRecLevel
SelectAdjustExit
-20 -3 0dB
CH1
CH2
Reset
15
2
Question and Answer IconNeed help?

Do you have a question about the Synco G2 (A1) and is the answer not in the manual?

Summary

Product Instruction Overview

TX Transmitter Components

Overview of TX transmitter parts and functions.

RX Receiver Components

Overview of RX receiver parts and functions.

TX Operations

TX Power, Charging, and Mic Input

Details TX operations for power on/off, mute, charging, and mic input.

TX Operations Continued

TX Installation, Reset, Low Cut, Pairing

Covers TX installation, reset, low cut, and pairing procedures.

RX Operations

RX Power, Mute, Reset, Gain Control

Details RX power, mute, reset, and gain control operations.

RX Operations Continued

Setting Recording Levels

Specifications

Specifications Continued

Warranty Information

Synco G2 (A1) Specifications

General IconGeneral
Polar PatternOmnidirectional
Sampling Rate48 kHz
TypeWireless
Operating Range50 meters (164 feet)
Battery TypeBuilt-in rechargeable lithium battery
Battery LifeUp to 8 hours
Output Connectors3.5mm TRS
Frequency Response50 Hz - 20 kHz
CompatibilitySmartphones, cameras, computers

Related product manuals