4www.syncoaudio.com
New
firmware
Long press for 3 seconds to
hear the rst "beep" sound
then release
Long press for 5 seconds to
hear the second "beep" sound
then release
Long press for 8 seconds to
hear the third "beep" sound
then release
Long press for 11 seconds to
hear the fourth "beep" sound
then release
Pairing/Unpairing
Voice Prompts: Connecting and Pairing/
Unpairing
Set as the Master
Voice prompt: Master Mode
Set as Connection Level One
Voice prompt: Level One Pairing
Set as Connection Level Two
Voice prompt: Level Two Pairing
Button A
Button B
Short press
Long press
*Release to exit(For Master
Only)
Long press for 3 seconds to
hear the rst "beep" then
release
(For Connection Level 2 only).
Noise Cancellation on/o
Turn on the Dominant Mode
Search for and connect with nearby
Level 1 during disconnection.
To Next Page
Loading...