Need help?Do you have a question about the SYNCRO KT-331 and is the answer not in the manual?
General| Brand | SYNCRO |
|---|---|
| Model | KT-331 |
| Category | Remote Control |
| Number of Batteries | 2 |
| Material | Plastic |
| Color | Black |
Details manufacturer, product, intended use, and essential requirements for compliance.
Outlines applied harmonized standards, EMC, health, safety, and spectrum usage regulations.
Identifies and describes the function of each part of the transmitter.
Step-by-step guide on how to insert batteries into the transmitter.
Explains the LCD screen layout, battery voltage, and alarm indicators.
Guides on reversing servo operation and setting neutral positions.
Step-by-step process to establish a wireless connection between the transmitter and receiver.
Instructions for configuring the failsafe mechanism to ensure safety during operation.
Diagram showing connections for EP models with one servo and ESC.
Diagram illustrating connections for GP models with two servos.
How to change the throttle trigger position for optimal user ergonomics.
Information on the charging jack and the DSC connector's non-support for this model.
Steps to check the steering wheel's operation and front tire movement.
Guide on using the steering trim to align front tires when the wheel is neutral.
How to adjust steering angle sensitivity using the Dual Rate function.
Procedure to ensure the throttle is set to OFF before operating the model.
Explains the battery voltage display and low voltage alarm function.
Detailed steps to change the operational direction of servos.
How to activate and configure the ABS function for improved traction.
Procedures for selecting and editing model names in the transmitter's memory.
How to adjust the steering servo's left and right movement amounts simultaneously.
Independently adjust steering, throttle, and channel 3 movement ranges.
Adjusts initial steering and throttle response to be sharper or duller.
Important safety notes for operating in areas with potential interference.
Specific safety advice for the transmitter antenna and receiver installation.
To Next Page
