Normally, the disconnect tone from the Exchange is available for 30
seconds after the caller disconnects. Hence, if the Main greeting is longer
than 30 seconds and if the caller disconnects within the first few seconds,
the unit may not be able to detect the disconnect tone. Hence, for proper
detection of this tone, it is recommended that the Main greeting should be
less than 25 seconds long.
Disable = 0, Enable = 1. (Default = 0)
Program # 226:
To listen to the current value
You will hear:
“Two Two Six (0.6 sec silence) Zero”
Program # 199: Store Default values
Store all User default values in the non-volatile memory.
This program takes about 3 seconds to execute - any digits entered during
this period is ignored.
Hence, wait until the “Enter Program number” prompt is heard, before
pressing any more digits.
Note:
This program erases all the Extensions entered under the List of Valid
Extensions, List of Invalid Extensions, all Operator extensions, Fax
extensions, Single digit plans, and Holiday lists. However, all Greetings and
Audiotex messages are not deleted and will remain as they were.
30
To Next Page
Loading...