Adjusting On Screen Displays (OSD)
Aaudio: Adjusting Sound Quality
There are three adjustments to the OSDAudio Function, You can adjust these individually to your
personal preference.
Audio Settings
TREBLE Adjusts higher pitched sounds
BASS Adjusts lower pitched sounds
BALANCE Adjusts volume balance in Left and Right
DEFAULT Changes OSD Settings back to original
factory default settings
Selecting Stereo or Bilingual Programs
You can enjoy stereo, bilingual and mono programs under the TV Source.
Press the hotkey "MTS" until the desired sound indication appears.
Each time you press the button, the sound indication changes as
follows: Mono, SAP, Stereo*
STEREO
SAP
MONO
Select for stereo reception when viewing a program
broadcast in stereo
Select to automatically switch the TV to Secondary Analog
Program when a signal is received. (If no SAP signal is
present, the TV remains in Stereo Mode)
Select for mono reception. (Use to reduce noise during
weak stereo broadcasts)
26
To Next Page
Loading...