8
(3) SD card and card reader( demo video and some demo files saved
in SD card )
(4) Demo Foil
(5) Operating manual
【 note 1 】 : the packaging size is 67 cm * 67 cm * 54 cm, please
place it properly so that the operator has move access
【 note 2 】 : place the printer on the flat item that at least can
burden twice weight of the printer
【 note 3 】 : if the printer raised improperly , it should cause badly
damage, forbidden raising the printer by holding the upper cabinet
and the parts, please make sure to hold the printer bottom to raise
【 note 4 】 : please do not touch the print head direct by hands.
【 note 5 】 : please keep up the packaging case and packaging
materials properly for future moving and maintenance
4. Connect the power and insert SD card
【 note 1 】 : the printer power cable must match the rated power,
please check the power if proper by using different power
To Next Page
Loading...