11
3. Foil Installation
【 note 1 】 : please don't place the foil upside down (please refer
to the installation below), please don't print without the foil ribbon
installed
【 note 2 】 : please use the qualified thin film, foils or color
ribbon, the damage that caused by using unproper materials will be
out of warranty, and the fix fee will be at users own expense
4. Start
Please check to ensure all the below steps are finished before
printing
(1) SD card inserted (check to see if the SD card with the printing
job list).
(2) already loaded foil ribbon.
(3) printer is on power.
(4) the printing medium is on the platform
(5) the printer need to hold off the items around to prevent the
impact when the platform moving during printing
To Next Page
Loading...