SystemAir Ex 140-2 Operating And Maintenance Instructions

GB IE
Manufacturer
Our products are manufactured in compliance with applicable EC
standards and regulations.
Systemair AB
Industrivägen 3
SE-739 30 Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
EC Declaration of Conformity
as defined by the EC’s ATEX Directive 94/9EC.
Circular duct fan
Type Certificate no Authority
EX 140-2 SP03 ATEX 3101x SP *)
EX 140-2C SP03 ATEX 3101x SP
EX 140-4 SP03 ATEX 3101x SP
EX 140-4C SP03 ATEX 3101x SP
EX 180-4 SP03 ATEX 3101x SP
EX 180-4C SP03 ATEX 3101x SP
EX 140-2 SP03 ATEX 3101x SP *)
Rectangular duct fan
Type Certificate no Authority
KTEX 50-25-4 SP04 ATEX 3105x SP *)
KTEX 50-30-4 SP03 ATEX 3103x SP
KTEX 60-30-4 SP04 ATEX 3107x SP
KTEX 60-35-4 SP04ATEX3109X SP
KTEX 70-40-6 SP04ATEX3111X SP
Radial fan
Type Certificate no Authority
DKEX 225-4 SP04 ATEX 3106x SP *)
DKEX 250-4 SP03 ATEX 3104x SP
DKEX 280-4 SP04 ATEX 3108x SP
DKEX 315-4 SP04ATEX3110X SP
DKEX 355-6 SP04ATEX3112X SP
Roof fan
Type Certificate no Authority
DVEX 315D4 SP *)
DVEX 355D4 SP
DVEX 400D4 SP
DVEX 450D4 SP04ATEX3116X SP
DVEX 500D6 SP04ATEX3117X SP
DVEX 560D6
DVEX 630D6
SP= Swedish National Testing and Research Institute,
SE-501 15 BORÅS, Sweden.
The following harmonized standards are in use:
EN 50 014: 1997+A1 +A2
Explosion protected electrical material, general requirements.
EN 50 019: 2000
Design with increased safety ‘e’.
The manufacturer ensures that the products above are in
compliance with the requirements in the Machine directory, the
Low voltage directory and the EMC directory as listed below
EN 1127-1
Explosive atmosphere- Prevention of and protection against
explosion.
EN 13463-1:2001
Non-electrical equipment for potentially explosive atmospheres.
EC Declaration of Conformity
As defined by EC’s Machine Directive 98/37/EC, appendix II B.
The fan is not to be used before the parts, which it is
incorporated with, are in compliance with EC’s Machine
Directive.
The following harmonized standards are in use:
EN 60 204-1
Safety of machinery; electrical equipment of machines; general
requirements.
EN 60 034-1
Rotating electric machinery; part 1: Electrical ratings and duty
behavior.
EN 292
Safety of machinery. Basic concepts, general principles for
design.
EN294
Safety of Machinery; Safety distances
to prevent danger zones being reached by the upper limbs.
Observe: Conformity with EN 294 only concerns mounted safety
appliance under condition that these are included in the delivery.
The system manufacturer is responsible for the compliance with
EN 294.
EC Declaration of Conformity
as defined by EC’s EMC-directive 89/336/EEC, 92/31/EEC and
93/68/EEC
The following harmonized standards are in use:
EN 61000-6-3: Electromagnetic compatibility - Generic immunity-
Emission –Part 1: General requirements for equipment in homes,
offices, shops and similar environments.
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2:
General requirements – Immunity for appliances in industrial
environments.
The complete technical documentation is available.
Skinnskatteberg, 08 Aug 2003
Mats Sándor
Technical Manager

SystemAir Ex 140-2 Specifications

General

Brand	SystemAir
Model	Ex 140-2
Category	Fan
Language	English