SystemAir Topvex SC User Manual

12
|
Operation
6.1.1.3 Temperature control
Settings for temperature.
• Limit values
• Setpoint for current control type (Example 1)
• Min/max limitation
• Outdoor temperature values
Example 1: Setpoint for current control type
Data & Settings > Temperature control > Supply air controller
2020–10–22
Supply air temperature
10.4 °C
Setpoint adjustment
0 °C
Setpoint adjustment low speed
0 °C
Setpoint adjustment high speed
0 °C
Setpoint Supply air
18 °C
Example show temperature control type set to supply air. To change the setpoint, press on the current value and
change to desired setting in the following pop-up menu. Confirm with ok. (Editable text and values are shown in blue
on NaviPad.)
6.1.1.4 Fan control
Settings for fan control.
• Setpoint for different fan speed
• Fan compensation e.g. outdoor compensated fan curves
• Start delay of fans, shut of dampers etc.
• SFP menu
• External fans
6.1.1.5 Demand control
Settings for:
• CO2
• Recirculation
• Support control
• Free cooling
6.1.1.6 Fire/Smoke
Settings for:
• Fire dampers
• Smoke detector status
• Fire damper test
214959 | A004

SystemAir Topvex SC Specifications

General

Brand	SystemAir
Model	Topvex SC
Category	Air Handlers
Language	English