EasyManua.ls Logo

SystemAir Villavent VR-300 TK/B/3 User Manual

SystemAir Villavent VR-300 TK/B/3
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
205047/ 392471 14.01.2008/RD/KMB
Villavent
VR-300 TK/B /3 & /4
Bruks- og vedlikeholdsanvisning
Drift - och skötselanvisningar
Bedienungs- und Wartungsanleitung
User and maintenance instructions
Question and Answer IconNeed help?

Do you have a question about the SystemAir Villavent VR-300 TK/B/3 and is the answer not in the manual?

SystemAir Villavent VR-300 TK/B/3 Specifications

General IconGeneral
Airflow RateUp to 300 m³/h
Max. air flow300 m³/h
Heat Recovery EfficiencyUp to 85%
MountingWall-mounted
Supply voltage230 V
Voltage230 V
Frequency50 Hz
TypeHeat Recovery Ventilation

Summary

General Unit Overview

Operation

Supply Air Temperature Control

Controls supply air temperature using switch 'D' and automatic heater.

Warning Precautions

Changing Fresh Air/Extract Filter

Procedure for replacing disposable filters, recommended 1-2 times annually.

Checking the Heat Exchanger

Inspection and cleaning of the heat exchanger every 3 years.

Maintenance Tasks

Checking the Fans

Inspection and cleaning of fans (4 and 5) to maintain efficiency.

Cleaning Extract Louvers and Inlet Diffusers

Procedure for cleaning air outlets and vents as needed.

Checking the Fresh Air Intake

Regular checks of the fresh air intake grille for blockages.

Checking the Duct System

Inspection of the duct system for dust and grease build-up every 5 years.

Troubleshooting

Fan(s) do not start

Checks for power supply, connections, and fuses when fans fail to start.

Reduced airflow

Troubleshooting steps for low airflow, including filter and vent checks.

Cold supply air

Diagnosing causes for cold supply air, checking thermostat and filters.

Noise/vibrations

Identifying and fixing sources of noise or vibration in the unit.

Service Information

Related product manuals