t.a.c. TAC Xenta 511 User Manual

TAC Xenta 511 and 911 Handbook 2 TAC Xenta 511
14 (32), 0-004-7870-0 (EN) TAC AB, 16 May 2003
- Enter the IP address of the intended TAC Xenta 511
- Select Port (default 1068)
- UPDATE
- EXIT
3 Connect to the TAC Xenta 511.
4 Select the LDV Server Port (default 1068) under Configura-
tion/LTA for TAC Vista setup and use the same value as in LTA
for TAC Vista.
2.3.7 Other Connections, Port Usage, etc.
Device Connection
Please refer to the TAC Xenta Cable Guide, 0FL-3972, for details of
connecting different devices to the TAC Xenta 511.
Port usage and Properties
• RS232 port A modem
• RS232 port B configuration, commissioning
• 10Base-T IP network
• FTT-10 LonWorks network
User Administration
Users administration (user login, authority levels, etc.) is done via web
pages in the TAC Xenta 511.
Using the TCP Ports (Firewall)
If a TAC Xenta 511 and the IP network are located on opposite sides of
one or several firewalls, these firewalls must be configured to allow
traffic through.
The TAC Xenta 511 uses the following TCP/IP ports.
• Ports 20, 21 ftp access (fixed, only for testing purposes)
• Port 25 SMTP access
• Port 80 http access
• Port 443 https access
• Port 1068 (default) TAC Xenta 511
• Port 1233 Variable data access (fixed)
Security
Access to the unit will only be granted if the correct user name (or group
name) and password have been entered.

t.a.c. TAC Xenta 511 Specifications

General

Brand	t.a.c.
Model	TAC Xenta 511
Category	Server
Language	English