t.a.c. TAC Xenta 511 - 2 TAC Xenta 511; 2.1 General; 2.2 Hardware Installation; 2.3 Connection and Startup

TAC Xenta 511 and 911 Handbook 2 TAC Xenta 511
TAC AB, 16 May 2003 0-004-7870-0 (EN), 9 (32)
2 TAC Xenta 511
2.1 General
The TAC Xenta 511 is a device that is used as a web-based presentation
system for L
ONWORKS® networks. Using a standard web browser, the
operator can easily view and control the devices in the L
ONWORKS net-
work via the Internet or a local intranet.
The TAC Xenta 511 can also (at the same time) act as a L
ONTALK®
adapter between TAC Vista® and a L
ONWORKS network.
2.2 Hardware Installation
The TAC Xenta 511 is cabinet-mounted on a TS 35 mm norm rail
EN 50022.
Keep the unit dry and clean it externally using a dry cloth.
2.3 Connection and Startup
Sections 2.3.1 through 2.3.4 are mandatory for establishing web brows-
er contact with the TAC Xenta 511.
2 3 4 5 6 7 8 10
12 13 14 15 16 17 18 20
90 (3.5)
110 (4.3)
70 (2.8)
48 (1.9)
45 (1.8)
75 (3.1)
10.1
(0.4)
Ø 4 (0.2)
TAC Xenta 511 dimensions, mm (in.)