Need help?Do you have a question about the t.amp TSA 4-700 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power per channel @ 4 Ohms | 700 W |
| Power per channel @ 8 Ohms | 400 W |
| Power @ 8 Ohms bridged | 1400 W |
| Frequency Response | 20 Hz - 20 kHz |
| THD (Total Harmonic Distortion) | < 0.1% |
| Signal-to-Noise Ratio | > 100 dB |
| Damping factor | > 300 |
| Weight | 10.5 kg |
| Input impedance | 20 kOhm |
| Protection circuits | Short circuit, DC, Overload |
| Inputs | XLR |
| Outputs | Speakon |
| Input Sensitivity | 0.775V |
Provides details on obtaining the manual as PDF and using online resources for assistance.
Explains the use of square brackets for controls and cross-references for navigation.
Outlines the meaning of symbols and signal words used to indicate warnings and important information.
Defines the proper use of the device and the consequences of misuse.
Highlights risks for children, including choking hazards from small parts and packaging.
Details dangers of electric shock from internal high voltages and improper mains cabling.
Warns about potential hearing impairment from loud volumes and fire risks from ventilation obstruction.
Covers safe operating conditions and essential power supply connection precautions.
Discusses potential interference from magnetic fields and floor staining from rubber feet.
Lists common features across all models, such as power supply, XLR inputs, and protective circuits.
Provides instructions for unpacking, checking for damage, and making connections safely.
Illustrates and describes the controls and indicators on the front panel of the TSA 4-700 model.
Details the function of the POWER switch and the various status LEDs and gain controls.
Illustrates and labels the connectors and switches on the rear panel of the TSA 4-700.
Explains the IEC chassis plug, output sockets, input channels, and selector switches.
Shows the front panel layout for TSA 1400 and TSA 2200 models with controls and indicators.
Details the POWER switch, status LEDs, and input gain controls for channels A and B.
Illustrates the rear panel connections for TSA 1400 and TSA 2200, including power, outputs, and inputs.
Explains the IEC plug, output sockets, input channels, and selector/lift switches.
Displays the front panel layout for the TSA 4000 model, showing controls and indicators.
Details the POWER switch, status LEDs, and input gain controls for channels A and B.
Illustrates the rear panel connections for the TSA 4000, including power, outputs, and inputs.
Explains the IEC plug, output sockets, input channels, and operating mode selector switch.
Shows the front panel layout for TSA 4-300 and TSA 4-1300 models, detailing controls and indicators.
Details the POWER switch, status LEDs, and input gain controls for channels A to D.
Illustrates the rear panel of the TSA 4-300, showing power input, reset button, outputs, and inputs.
Explains the IEC plug, reset button, output sockets, input sockets, and mode selection switches.
Details the function of mode selection switches (M1, M2, M3) and bridge mode push-buttons.
Explains input sensitivity settings and mode selection for output channels C and D.
Illustrates the rear panel of the TSA 4-1300, showing power input, reset button, outputs, and inputs.
Explains the powerCON input, reset button, output sockets, input sockets, and mode selection switches.
Details the function of mode selection switches (M1, M2, M3) and bridge mode push-buttons.
Explains input sensitivity settings and mode selection for output channels C and D.
Table showing current consumption for TSA 4-700 at 1/8 and 1/3 nominal power under different load impedances.
Details current consumption for TSA 1400 and TSA 2200 models under various load conditions.
Provides current consumption data for the TSA 4000 model across different load impedances.
Lists current consumption for TSA 4-300 and TSA 4-1300 models with varying loads.
Presents detailed technical specifications for the TSA 4-700, including output power and frequency response.
Details input impedance, sensitivity, voltage amplification, and dimensions for the TSA 4-700.
Lists technical specifications for the TSA 1400, including output power, slew rate, and THD.
Details input impedance, sensitivity, voltage amplification, and dimensions for the TSA 1400.
Presents technical specifications for the TSA 2200, including output power, voltage swing, and frequency response.
Details input impedance, sensitivity, voltage amplification, and dimensions for the TSA 2200.
Lists technical specifications for the TSA 4-300, including output power, THD, and input impedance.
Details voltage amplification, signal-to-noise ratio, protection circuits, and dimensions for the TSA 4-300.
Presents technical specifications for the TSA 4-1300, including output power, THD, and frequency response.
Details voltage amplification, signal-to-noise ratio, protection circuits, and dimensions for the TSA 4-1300.
Lists technical specifications for the TSA 4000, including output power, slew rate, and crosstalk.
Details input impedance, sensitivity, voltage amplification, and dimensions for the TSA 4000.
Provides guidance on selecting cables and plugs for optimal audio transmission and avoiding damage.
Explains the pin assignments and differences between balanced and unbalanced XLR connectors.
Details the pin assignments for NL4 connectors used for speaker outputs, including phase information.
Provides instructions for cleaning fan grids, emphasizing safety precautions and cleaning methods.
Offers guidance on the proper disposal of packaging materials and the old device according to WEEE.
To Next Page
