Current Draw Table (in Amperes)
This table provides typical current draw for each model as a function of load output power level.
Units of measurement are Amperes r.m.s.
NOTE! Current draw shown is under 220V. For 230V models, multiply values shown by 0.96; For 120V models, mu
-ltiply values shown by 1.83; For 100V models, multiply values values shown by 2.2 .
Model
TSA1400
TSA2200
TSA4-700
Load
(2x)8 Ohms
(2x)8 Ohms
(4x)8 Ohms
(2x)4 Ohms
(2x)4 Ohms
(4x)4 Ohms
(2x)2 Ohms
(2x)2 Ohms
(4x)2 Ohms
8 Ohms bridged
8 Ohms bridged
(2x)8 Ohms bridged
4 Ohms bridged
4 Ohms bridged
(2x)4 Ohms bridged
1/8 Power
(pink noise)
1/3 Power
(pink noise)
Full Power
(sine)
1.93A/330W
1.69A/260W
3.1A/400W
2.86A/480W
4.0A/680W
4.4A/650W
4.1A/700W
5.0A/850W
6.4A/950W
3.0A/500W
4.1A/680W
4.3A/620W
5.4A/984W
4.5A/820W
6.1A/870W
4.4A/734W
2.73A/400W
5.8A/860W
6.9A/1200W
6.5A/1180W
9.8A/1500W
7.2A/1313W
9.8A/1800W
11.6A/1800W
6.9A/1200W
6.8A/1200W
15A/2450W
14.2A/2690W
10.1A/1900W
19.5A/3300W
7.74A/1400W
9.5A/1700W
9.5A/1400W
12.2A/2300W
14.97A/2800W
15.4A/2450W
17.3A/3345W
21A/4200W
20A/3100W
12.4A2300W
15.2A/2850W
15A/2450W
17.2A/3310W
23A/4600W
19.5A/3300W
- 1/8 power (pink noise) represents typical program with occasional clipping.Use this rating for
most applications.
- 1/3 power (pink noise)represents severe program with heavy clipping.
- Full power(sine) is continuous sine wave driven at 1% clipping.
07
To Next Page
Loading...
