T-Drill T-65CU - User Manual

65 pages

Save Page as PDF

To Next Page

INSTRUCTION MANUAL

SPARE PARTS LIST

COLLARING MACHINE



Main Page

Table of Contents3
Notes on the Use of the Instruction Manual5
Symbols and Warnings5
Symbolism5
General Safety Instructions6
General Safety Instructions for Work Area6
Safety Instructions for Tool7
T-65B Battery and Charger Specific Warnings8
Safety Instructions for Tee Forming9
General Information on T-DRILL T-6510
Introduction10
The Parts of the T-6510
Information about Accessories11
Operating Range of the Machine11
Technical Specifications12
Transport, Handling and Storage12
Preparing before Use13
Detachment and Attachment of the Connecting Cord13
Start-Up Check for T-6514
Start-Up Check for T-65B14
The Operation of the Machine14
Description of the Control Devices14
Selection and Adjustment of the T-DRILL Heads16
The Identification of the T-DRILL Head16
The Fine Adjustment of the Outlet Diameter17
Changing the Outlet Size18
Chucking the T-DRILL Head19
Chucking19
Removal19
The Tee Forming Process with the T-DRILL T-6520
Annealing of Tube23
Forming a Tee to Run Tubes > 425
Maintenance26
The Maintenance of the T-DRILL T-6526
The Polishing and Replacement of the Forming Pins26
Trouble-Shooting27
Disposal of the T-DRILL Machine29
Warranty29
Supplement30
Capacity Chart in Millimeters and Inches30
Capacity and Instruction Chart31
Notcher ND-5432
General32
Purpose of the Tool32
Operating Range32
Dimensions33
Description of Parts33
Operation Instructions33
Maintenance33
Loose Holder Pins33
Dimple /Depth Stop Are too Shallow33
Adjustment of Notcher Tips34
How to Replace Lower die34
How to Replace Upper die34
Ordering Spare Parts35
Spare Parts List37
Pipe Collaring Machine for Copper37
The T-65 Tee Forming Unit39
T-Drill Collaring Heads40
Collaring Head Ø 8 (5/16") and Pair of Pins 5310408A41
Collaring Head Ø 8 (5/16") 531039841
Collaring Head Ø 10 MM (3/8") 5310399 B42
Collaring Head Ø 12 MM (1/2") 5310400 C43
Collaring Head Ø 15 MM (5/8") 531040144
Collaring Head Ø 18 MM (3/4") 5310402 C45
Collaring Head Ø 22 MM (7/8") 5310403 C46
Collaring Head Ø 28 MM (1 1/8") 5310404 D47
Collaring Head Ø 35 MM (1 3/8") 531041148
Collaring Head Ø 42 MM (1 1/2") 531041249
Collaring Head Ø 54 MM (2") 531041350
Optional Equipment51
Notcher ND-54 509029452
Counter Plate 554008554
Chain 554020155
Universal Chuck 533067255
EC Declaration of Conformity56

Need help?

Do you have a question about the T-Drill T-65CU and is the answer not in the manual?

T-Drill T-65CU Specifications

General

Brand	T-Drill
Model	T-65CU
Category	Power Tool
Language	English

Related product manuals

T-Drill T-60

46 pages

T-Drill T-65CU - User Manual

Table of Contents

T-Drill T-65CU Specifications

Related product manuals