Need help?Do you have a question about the T-Drill T-60 and is the answer not in the manual?
General| Model | T-60 |
|---|---|
| Category | Power Tool |
| Frequency | 50/60 Hz |
| Max Pipe Diameter | 60 mm |
| Max Wall Thickness | 5 mm |
Explains warning symbols like IMPORTANT!, NOTE!, and DANGER! used for safety information.
Defines various symbols found on the tool for user guidance and safety.
Guidelines for maintaining a safe and organized work environment, including lighting and avoiding hazards.
Essential safety measures for handling, operating, and maintaining the tool to prevent injury.
Specific safety instructions and precautions to be followed during the tee forming process.
Provides a general overview of the T-DRILL T-60 tee forming machine and its purpose.
Identifies and labels the key parts of the T-DRILL T-60 machine.
Lists and describes the accessories recommended for use with the T-DRILL T-60.
Details the operational capabilities, tube sizes, and limitations of the T-60 machine.
Presents detailed technical data, including dimensions, weight, voltage, and performance metrics.
Guidelines for transporting the T-60, including box dimensions and weight, and proper storage conditions.
Instructions for detaching and attaching the connecting power cord to the T-60 unit.
Essential checks to perform before operating the T-60 machine to ensure proper function.
Explains the function and operation of the T-DRILL T-60's controls, including trigger and selectors.
Guide to selecting the correct T-DRILL head and adjusting it for optimal performance.
Detailed steps for fine-tuning the outlet diameter by adjusting the forming pins.
Procedures for securely installing and safely removing the T-DRILL head from the chuck.
Instructions for adapting older T-DRILL heads to the T-60 machine by shortening the drill core.
Step-by-step instructions for performing the tee forming operation using the T-DRILL T-60.
Procedure for annealing the tube to prepare it for the tee forming process.
General maintenance guidelines for the T-DRILL T-60, including cleaning and service notes.
Instructions on how to replace the forming pins in the T-DRILL head.
Identifies common problems with the T-DRILL T-60 and provides remedies.
Information on the proper disposal of the T-DRILL machine according to regulations.
Outlines the warranty coverage, terms, and conditions for the T-DRILL T-60.
Provides a chart for capacity and instructions related to different tubing sizes and tee formations.
A comprehensive list of spare parts for the T-60 machine with part numbers and descriptions.
Detailed parts breakdown and list for the T-60 Tee Forming Unit assembly.
Lists all individual parts that constitute the T-DRILL Head.
Specific parts list for the Counterplate assembly and its associated chain.
Details the optional accessories that can be purchased for the T-DRILL T-60.
To Next Page